基于双指标多等级的土壤重金属生态风险评价

采用土壤中重金属的全量和有效态双重指标,建立基于多等级综合评估的土壤中重金属生态风险评价模型,将联合概率曲线法引入土壤评价模型,分析重金属暴露浓度与毒性数据的概率分布,考察重金属对土壤生物的毒害程度,从而确定土壤中重金属对于生态系统的风险。建立从简单到复杂的多等级综合评价方法,表征重金属的污染等级、浓度效应、多种重金属污染物的协同效应、不同重金属的毒性效应和土壤对不同重金属污染物的敏感性。选择典型地区采集有代表性的土壤样品,测定不同重金属的总量和有效态,验证评价模型的实用性和评价分级的合理性。旨在解决土壤重金属风险评价的方法学问题,为土壤环境质量管理提供支持。     

蚯蚓-稻壳炭联合堆肥对工业污泥中重金属的影响研究

蚯蚓堆肥相关研究多集中在生活污泥方面,对工业污泥的探索较少。该研究以马鞍山某钢铁污水处理站污泥为例,添加不同比例稻壳炭(2%、4%、8%),设置污泥单独堆肥、稻壳炭与污泥堆肥以及蚯蚓-稻壳炭联合污泥堆肥试验,探索蚯蚓与稻壳炭联合堆肥对工业污泥中重金属形态和生物有效性的影响。研究表明,(1)相比污泥单独堆肥,稻壳炭联合污泥堆肥能增加污泥pH、EC、TP和降低TOC、TN,而蚯蚓联合稻壳炭堆肥污泥可增加TN,并进一步增加污泥EC、TP,显著降低污泥的pH、TOC。(2)稻壳炭堆肥中重金属Zn、Cu、Pb、Cd含量因浓缩效应而上升;而蚯蚓联合稻壳炭堆肥,重金属含量显著下降,添加4%稻壳炭时,重金属Zn、Cu、Pb、Cd质量分数达到最小值,分别为856.64、137.10、158.92、15.48mg·kg-1。(3)重金属形态分析表明,随着稻壳炭比例增加,稻壳炭堆肥中重金属Zn、Cu、Pb、Cd的交换态和碳酸盐结合态转化为残渣态及铁锰氧化态的比例增大,添加8%稻壳炭时DTPA提取的有效态重金属质量分数最低,分别为705.72、47.95、50.43、4.47 mg·kg-1;蚯蚓-稻壳炭联合堆肥会使得污泥中重金属交换态、碳酸盐结合态、铁锰结合态和有机结合态均向残渣态转化,添加4%稻壳炭与蚯蚓的协同转化能力最大,Zn、Cu、Pb、Cd有效态重金属质量分数分别为629.84、38.63、36.76、1.63mg·kg-1,说明稻壳炭添加入蚯蚓堆肥可进一步降低工业污泥中重金属有效性,使重金属钝化。本研究可为稻壳炭联合蚯蚓堆肥处理工业污泥提供参考和科学依据。     

Biofiltration and disinfection codetermine the bacterial antibiotic resistome in drinking water: A review and meta-analysis

• Published data was used to analyze the fate of ARGs in water treatment. • Biomass removal leads to the reduction in absolute abundance of ARGs. • Mechanism that filter biofilm maintain ARB/ARGs was summarized. • Potential BAR risks caused by biofiltration and chlorination were proposed. The bacterial antibiotic resistome (BAR) is one of the most serious contemporary medical challenges. The BAR problem in drinking water is receiving growing attention. In this study, we focused on the distribution, changes, and health risks of the BAR throughout the drinking water treatment system. We extracted the antibiotic resistance gene (ARG) data from recent publications and analyzed ARG profiles based on diversity, absolute abundance, and relative abundance. The absolute abundance of ARG was found to decrease with water treatment processes and was positively correlated with the abundance of 16S rRNA (r² = 0.963, p<0.001), indicating that the reduction of ARG concentration was accompanied by decreasing biomass. Among treatment processes, biofiltration and chlorination were discovered to play important roles in shaping the bacterial antibiotic resistome. Chlorination exhibited positive effects in controlling the diversity of ARG, while biofiltration, especially granular activated carbon filtration, increased the diversity of ARG. Both biofiltration and chlorination altered the structure of the resistome by affecting relative ARG abundance. In addition, we analyzed the mechanism behind the impact of biofiltration and chlorination on the bacterial antibiotic resistome. By intercepting influent ARG-carrying bacteria, biofilters can enrich various ARGs and maintain ARGs in biofilm. Chlorination further selects bacteria co-resistant to chlorine and antibiotics. Finally, we proposed the BAR health risks caused by biofiltration and chlorination in water treatment. To reduce potential BAR risk in drinking water, membrane filtration technology and water boiling are recommended at the point of use.     

阴角邻面火灾作用下L型钢管混凝土柱耐火极限研究

运用有限元软件ABAQUS计算L形带肋钢管混凝土柱阴角相邻两面受火全过程下的耐火极限,分析了阴角邻面受火方式下构件内部温度场和应力场的变化规律,在此基础上分析荷载比、宽厚比、计算长度、加劲肋纵向间距、荷载偏心率、荷载角等参数对耐火极限的影响规律。数据表明:荷载比、计算长度对构件耐火极限影响较大,随着荷载比和计算长度的增大,耐火极限基本呈线性下降;加劲肋间距对构件耐火性能影响较小;由于L形柱的特殊形式,偏心荷载对耐火极限的影响规律较复杂,荷载作用点偏向低温区可以提高耐火极限。     

萃取法分离回收不锈钢酸洗污泥硫酸浸出液中的重金属

采用非皂化P204和皂化P204萃取剂对不锈钢酸洗污泥的硫酸浸出液进行萃取。在浸出液pH为0.80、非皂化P204体积分数为25%、萃取剂与浸出液体积比为1∶2、萃取时间为5 min的条件下,Fe~(3+)萃取率达99.64%,Cr~(3+)和Ni~(2+)萃取率为3.98%和6.99%,一次萃余液pH为0.64。采用皂化P204对除Fe~(3+)后的一次萃余液进行萃取,在P204体积分数为25%、萃取剂与浸出液体积比为1∶2、萃取剂皂化率为60%、一次萃余液pH为1.50、萃取时间为5 min的条件下,Ni~(2+)萃取率为93.12%,Cr~(3+)萃取率为20.69%,二次萃余液pH为2.63。     

基于SVM的矿井通风阻力系数影响因素分析与预测

矿井通风阻力系数是通风安全最重要的基础参数之一，为了实现矿井通风阻力系数简单准确地预测，提出了利用支持向量机（SVM）来预测矿井通风阻力系数的方法。通过分析影响因子与矿井通风阻力系数的相关性关系，并利用MATLAB逐步建立单影响因素与矿井通风阻力系数、多影响因素与矿井通风阻力系数之间的SVM预测模型，对比分析各预测模型的相对误差，确定最佳矿井通风阻力系数预测模型，即当输入模型影响因素为巷道断面积、周长和支护方式时，预测相对误差小于10%的样本数占测试样本的76%，相对误差小于20%的样本数占测试样本的90%。结果表明:该预测方法在矿井通风阻力系数预测中是可行的，并具较高的准确性。     

土壤中7种重金属和砷测定的精密度控制指标研究

通过对浙江省近700组实际土壤样品进行分析,研究了土壤中铜、铅、锌、铬、镍、镉、砷、汞7种重金属和砷测定的精密度控制指标(实验室内相对偏差和实验室间相对偏差),并与行业标准分析方法和文献进行了比较,旨在为环境监测质量控制与质量保证工作提供参考。经统计分析,建议实验室内相对偏差控制指标如下:铜,≤15%;铅,≤15%;锌,≤15%;铬,≤15%;镍,≤15%;镉,≤20%;砷,≤15%;汞,≤50%。建议实验室间相对偏差控制指标如下:铜,≤25%;铅,≤25%;锌,≤20%;铬,≤20%;镍,≤25%;镉,≤35%;砷,≤25%;汞,≤55%。     

TSLCDM长袋低压脉冲布袋除尘器及其应用

为了使电炉烟气治理过程中污染源的排放达到国家排放标准,提出一种TSLCDM长袋低压脉冲除尘器(简称TSLCDM除尘器)。通过对该除尘器结构、除尘原理以及不同工况下除尘效率和过滤阻力的分析,得到该除尘器的除尘效率>99.9%,压力损失<1200 Pa,最终排出的烟气含尘质量浓度约5.54 mg/m3,满足了国家的超低排放要求,以泉州某公司电炉项目除尘系统为研究对象,证明了该新型脉冲布袋除尘器在电炉烟气治理除尘系统的应用效果,具有很好的经济和环境效益。     

金属粉尘湿法处理系统的设计和除尘效果分析

为改善金属抛光操作人员的工作环境、降低抛光金属粉尘的爆炸风险，设计一种金属粉尘湿法处理系统，并通过建立多相流动数值模型，探究其内部流场特征与金属粉尘运动规律，分析金属粉尘湿法处理系统的除尘效率。研究结果表明:大粒径的金属粉尘直接重力沉降至水槽中；小粒径(PM10)的金属粉尘易随气流进入风道，进而通过水雾脱除；采用洁净进气源，可以有效降低工人操作环境的粉尘浓度；增加细水雾，可以有效提高金属粉尘湿法处理系统的除尘效率，对PM10的除尘效率从30%提升至82%。     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.